Taylor "Big Red" TEC/TECDS/TECSP/TECTS Series
"Industrial Trucks with the lowest total operating cost in the industry."

Tier III Cummins QSB6.7 electronic, turbocharged diesel engine Three speed fully reversing, modulated, powershift transmission with inching and electric shift control Rugged high-strength, all welded chassis and frames Ergonomically designed shock-mounted operator stations Fingertip full hydrostatic steering Lower fan speed and engine speed for less noise Cooling system with wide fin spacing to reduce dirt build-up and provide optimum engine cooling Meets new proposed ANSI B56.1 standard All daily checks can be made from running board Taylor Machine Works has designed, built, and marketed empty-container handlers since 1976. "Big Red" empty handlers reflect the experience and knowledge gained during those years. Taylor empty handlers are "All American," designed and built in the USA. Taylor is always on the cutting edge of industrial technology, always committed to designing and building the best, most productive, most dependable container handling equipment in the world. The TEC and TECSP Series are equiped with a wide assortment of masts and attachments to better meet your particular need. The following lists the standard mast and attachment by model.   TEC-150H 30-ft ULTRA-VU Mast Empty Container Attachment with Two ISO Rear Twistlocks ± 24-inch Side Shift TEC-155H 40-ft ULTRA-VU Mast Empty Container Attachment with Two ISO Rear Twistlocks ± 24-inch Side Shift TECDS-150H 32-ft ULTRA-VU Mast Empty Container Attachment with Four Corner Twistlocks ± 15-inch Side Shift TECSP-155H 42-ft ULTRA-VU Mast Empty Side Post Container Attachment with Two ISO Rear Twistlocks ± 20-inch Side Shift TECSP-155HD 45-ft ULTRA-VU Mast Empty Side Post Container Attachment with Two ISO Rear Twistlocks ± 20-inch Side Shift TECSP-156H 45-ft ULTRA-VU Mast Empty Side Post Container Attachment with Two ISO Rear Twistlocks ± 20-inch Side Shift TECSP-157/8 63-ft ULTRA-VU Mast Empty Side Post Container Attachment with Two ISO Rear Twistlocks ± 20-inch Side Shift TECTS-198/9 63-ft ULTRA-VU Mast ELME Attachment handles Two 20-ft. or 40-ft. ISO standard containers simultaneously with Four Horizontal Twistlocks ± 23-inch Side Shift
	Taylor TEC/TECSP Product Line Standard Specifications TEC-150H (15,000-lb. Cap./4-High Stacking at 94" Center of Load, 144" Wheelbase) TEC-155H (15,000-lb. Cap./5-High Stacking at 96" Center of Load, 148" Wheelbase) TECDS-150H (15,000-lb. Cap./4-High Stacking at 94" Center of Load, 144" Wheelbase) TECSP-155H (15,000-lb. Cap./5-High Stacking at 94.5" Center of Load, 148" Wheelbase) TECSP-155HD (97.75" Center of Load, 180" Wheelbase) Rated Capacity for 9.5-ft High Containers: 15,000-lbs/5-high stacking Rated Capacity for 8.5-ft High Containers: 15,000-lbs/6-high stacking TECSP-156H (95.75" Center of Load, 148" Wheelbase) Rated Capacity for 9.5-ft High Containers: 15,000-lbs/5-high stacking Rated Capacity for 8.5-ft High Containers: 15,000-lbs/6-high stacking TECSP-157/8 (102.75" Center of Load, 180" Wheelbase) Rated Capacity for 9.5-ft High Containers: 15,000-lbs/7-high stacking Rated Capacity for 8.5-ft High Containers: 15,000-lbs/8-high stacking TECTS-198/9 (105" Center of Load, 180" Wheelbase) Rated Capacity for 9.5-ft High Containers: 19,000-lbs/7-high stacking Rated Capacity for 9.5-ft High Containers with Twin Stacking: 19,000-lbs/8-high stacking Rated Capacity for 8.5-ft High Containers: 19,000-lbs/8-high stacking Rated Capacity for 8.5-ft High Containers with Twin Stacking 19,000-lbs/9-high stacking

Standard equipment is subject to change without notice.
For more information on the products shown above or any products the Taylor Group has to offer please Contact Us

For More Information, Contact Us.